I have a backyard fence in my yard.
It’s not a perfect one, and I’m not the first to have one broken in, but it’s been fixed with a good bit of ingenuity.
But I was having trouble getting it to work properly.
First, the water that feeds into the fence is actually a little more acidic than normal.
So the idea was to use a special vinegar solution to kill bacteria.
The vinegar helps dissolve the dirt and debris in the water.
Then, I used a special metal bar to seal the bar and make sure it doesn’t corrode.
I also bought a new mesh for the fence.
I use it for my fence posts and it’s much easier to install than a regular mesh, so I’ve been using it for a few months now.
The solution I’ve come up with for the water problem is actually quite simple.
It involves using a vinegar solution mixed with water.
What you need: 1 gallon of waterThe vinegar solutionMix the water with the vinegar solution.
The solution should be the consistency of soft drink and you don’t want it to be too thick.
You’ll need to measure the water and make a good batch of it.
You can use a spray bottle to make a paste.
Then, use a rubber spatula to spread the paste evenly over the fence posts.
The mesh needs to be covered with the paste.
You could also use a sheet of clear plastic, but the plastic I found was too hard and it stuck to the mesh.
Then, pour the paste on the fence mesh.
The plastic should stick to the metal bars, so you’ll need some sort of glue to hold the mesh in place.
Put the mesh back together.
Now you’re ready to take it down!
The instructions are simple, but they also provide tips and tricks for better success.
If you have any questions, feel free to leave them below.
And if you’ve already been through the process, check out this post on how to fix a backyard ditch.